Whites Electronics Metal Detectors

Accessories & Parts
Rods, Hardware,etc

Parts for Current Models

Parts for Obsolete Models

Parts for Current Models

Lower Fiber Rod

Replacement lower rod section connecting the loop to the upper aluminum rod. When used with older models requires 802-5096-14 Adapter Kit
P/N 500-0242-1
Price $9.95

3/8" Loop Hardware

Replacement nut, bolt and washers for current models.
P/N 802-5096-11
Price $1.50

Loop Steadying Bracket

Fits Blue Max 950 and Surfmaster loops. Locks the loop angle in place for working in brush, water or tall weeds. Angle can be adjusted.
P/N 802-5190-4
Price $9.95

XLT® DFX Hipmount Kit

Extension cable included. Hipmounts any XLT model. Use separate XLT rod.
P/N 802-7158
Price $59.95

Space Saver Rod Kit

Converts Classics and early Goldmaster models from the standard two-piece rod assembly to a three-section assembly for tighter packing. (Does not fit Classic SL series instruments.)
P/N 802-5236
Price $39.95

Diver Rod Kit

Converts handheld Surfmasters to short rod for scuba use.
P/N 802-5195-1
Price $39.95

DFX™/XLT®/Quantum®/CL SL Detector Stand

Fits all Classic SL's, Quantums and XLT. Mounts to existing control box screws. Keeps control box off abrasive ground.
P/N 502-0028
Price $4.95

5' Extension Cable

Extends loop cable length by approximately 5'. Replacement extension for hipmount kits manufactured from 1979 through 1988.
P/N 802-7022
Price $24.95

Surfmaster® "O" Ring

Replacement "O" ring seal for main control box lid.
P/N 527-0043
Price $4.95

Silica Gel Bag

Replacement absorbent silica draws moisture away from internal components.
P/N 627-0045
Price $1.00

Speaker Cover Decal

Protects speaker from dirt and moisture.
P/N 624-0264
Price $1.00

Parts for Obsolete Models

Heavy Duty Clevis Kit

Old-style separate clevis for pre-1988 models. Connects loop to lower rod.
P/N 802-5196-3
Price $6.95

Loop Adapter Kit

Needed if replacing 1979 to early 1992 clevis or isolator with the later version lower fiber rod.
P/N 802-5096-14
Price $3.95

Detector Stand "SL"

Mounts to control box using existing control box screws. Keeps control box out of wet grass and off abrasive ground.
P/N 502-0115-1
Price $4.95

SL Hipmount Kit

No extension cable. Hipmounts any SL model. Uses separate SL rod. Stainless steel bracket mounts on control box and allows the angle of the control box to be tilted for optimum display viewing.
P/N 802-5171
Price $49.95


		*Locate Your Local Dealer*
	*ZIP*
White's Electronics Hand Builds the World's Best Metal Detectors in Sweet Home Oregon, U.S.A.